Volkswagen Owners Club Forum banner
3K views 1 reply 2 participants last post by  briano1234 
#1 ·
I'm replacing my instrument cluster that has a clock with one that has a Tach. I know I need to run a wire from the Neg. Coil terminal but I'm not sure where to run it? Does anyone have a wiring diagram of a 83-84 GTI cluster connector? Or has anyone else done this before? Thanks!
 
#2 ·
Depending on the cluster it should be the black wire or the red / black on the main connector pin 6. The other side ties back to the clock.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top